Crimpers
NC-6-38MF
High Pressure Hose: HYD, 3/8 Male/Female (6′), certified non-conductive,double rubber cap comes standard to protect fittings while not in use
NC-30-38MF
High Pressure Hose: HYD, 3/8 Male/Female (33′), certified non-conductive,double rubber cap comes standard to protect fittings while not in use
NC-10-38MF
High Pressure Hose: HYD, 3/8 Male/Female (10′), certified non-conductive,double rubber cap comes standard to protect fittings while not in use
FP-700
FP-700 Foot Pump: a portable, tough, hydraulic steel pump that has tow speed pumping pistons for rapid advance and an external adjustable pressure setting from 4.000 to 10,000 psi output. An internal oil bladder allows the tool to be used in any position.
HP-700
HP-700 Hand Pump: a portable, tough, hydraulic steel pump that has tow speed pumping pistons for rapid advance and an external adjustable pressure setting from 4.000 to 10,000 psi output. An internal oil bladder allows the tool to be used in any position.
REC-P600R
REC-P600R Wireless Remote Controlled Hydraulic Pump: The Huskie REC-P600R is a wireless, remote operated, single acting hydraulic pump. It is our lightest most versatile hydraulic pump. The REC-P600R incorporates a high frequency receiver exclusively paired to a heavy duty cordless remote. The weather resistant IP65 rated remote utilizes two push buttons to advance and retract the tool
REC-P600
REC-P600 Battery Operated Hydraulic Pump: The REC-P600 not only utilizes a smaller design to fit into tighter spaces|but also has the ability to work off of one or two batteries. The REC-P600 is four pounds lighter than the REC-P1.; There is a 360º swivel coupler and a remote for the advance and retract of the ram.
HPM-P3
HPM-P3 Gas Engine Hydraulic Pump: a self-contained high pressure pump, with manual operation. It is equipped with a 5.5 HP Honda engine. A four-way valve controls the hydraulic fluid direction for the advance and retract modes. One, double-acting tool can be operated or two, single-acting tools at one time. Connection to one port for single acting tools will work since the control valve will dump the fluid when shifted to the neutral position. The pump is very compact and comes with carrying cage
HPG-4
HPG-4 Gas Engine Hydraulic Pump: A self-contained high pressure pump, with manual operation. It is equipped with a 6 HP Briggs & Stratton engine. A four-way valve controls the hydraulic fluid direction for the advance and retract modes. One double acting tool can be operated or two single acting tools at one time. Connection to one port for single acting tools will work since the control valve will dump the fluid when shifted to the retract position. The pump is very compact and comes with carrying handles.
REC-P1
REC-P1 Battery Operated Hydraulic Pump: The REC-P1 is supplied with a push button remote control that allows the operator to advance|hold|and retract when needed. The user is never committed to a full cycle and can always back off at any time during the advance– even when the pump is under pressure. High pressure|non-conductive hose can be attached to a 360° moveable swivel port on the pump. This swivel port allows the user to position the hose to fit in confined aerial buckets and manholes. Both batteries must be inserted in the pump to operate. It is recommended to operate the pump with a 10 foot hose|up to a maximum of 20 feet. A longer hose will cause cycle times to increase.
R-14EAD
R-14EAD Double Acting Hydraulic Pump: The R-14EAD is a fully remote controlled|double acting|10,000 psi|electric pump. The hand control allows the user to advance or release at any time. There is an auto cycle switch that allows the operator to push the advance button and the pump will automatically advance|run to 10,000 psi and release. This feature is used mostly for production crimping and cutting|where the operator must have the freedom of both hands. A remote foot control pedal is optional.; NOTE: When using any of these high pressure tools|always use 10,000 psi rated non-conductive hose (NC-16 series).
R-14EH
R-14EH Single Acting Hydraulic Pump: Push buttons permit the user to advance and retract at will. The user is never committed to a full cycle|and can always back off at any time during the advance even under pressure. This feature increases efficiency because cuts and crimps can be adjusted as necessary|simply by stopping the advance or retract mode. A 10-foot remote control cable provides both safety and convenience. The user can set up an operation and then move away from the work site before engaging the tool. An over-ride switch on the pump allows full control at the pump motor. The low amperage of this pump allows it to be used virtually anywhere.
R-14EA
R-14EA Single Acting Hydraulic Pump: The two button hand control allows the user to advance|hold|or release at any time. When 10,000 psi is reached|the pump will automatically shut off and hold until the operator pushes the release button to retract the tool. There is an auto cycle switch that allows the operator to push the advance button and the pump will automatically advance|run to 10,000 psi and release. This feature is mostly used for production crimping and cutting where the operator must have the freedom of both hands. A remote foot control pedal is optional.; NOTE: When using any of these high pressure tools|always use 10,000 psi rated nonconductive hose (NC-16 series).
Ready To Order?
© 2024 Brenco Power Line Tools