Meters & Instruments
WDC4500
Range taking die for #4-500 Cu Str. and #2-4/0 Cu Flex *When used woth UL Listed/CSA Certified YA, YS, YA-A, and YS-A series terminals and splices, connections are UL.CSA. Rage taking dies also for use on the YAV and YSV series.
WDA8300
Range taking die for #8-300 AL. and #2-4/0 Cu Flex *When used woth UL Listed/CSA Certified YA, YS, YA-A, and YS-A series terminals and splices, connections are UL.CSA. Rage taking dies also for use on the YAV and YSV series.
44030
Knopp Phase Sequence Indicator with Case Kit: Phase Rotation Meter a straight forward sequence indication is provided over a wide variety of voltage and frequency by direction of rotor rotation. 60-600 volts, 25-60 Hz, 36″ red, white and blue leads
CM-1360
AC True RMS Clamp Meter, 1000V, 1000A, Calibrated: AC voltage measurement with digital low pass filter for accurate readings on variable frequency drives. Also measures DC voltage, resistance, capacitance and frequency. Tests continuity and diodes. Flashlight inside clamp jaw for easier work in dark locations. Backlight & relative mode for added versatility. AmpTip™ increases accuracy on small wires and low current. Two voltage detection modes – non-contact or using a single test lead. Has a Data hold. Recording of Maximum, Minimum, and Average readings
CM-660
AC True RMS Clamp Meter, 600V, 600A: AC voltage measurement with digital low pass filter for accurate readings on variable frequency drives. Also measures DC voltage, resistance and frequency. Tests continuity and diodes. AmpTip™ increases accuracy on small wires and low current. Two voltage detection modes – non-contact or using a single test lead. Data hold. Recording of Maximum, Minimum, and Average readings Includes (2) 1.5V AAA batteries, test leads, and carrying case
4769
High Voltage Self-Testing Voltage Detector Kit with URD Ranges: This kit includes, 4744 Tester 240V to 69kV w/URD Test Point Setting 15, 25, 35kV, 21517 Case, and 2500 Shotgun Adapter
4445
Voltage Detector Tester: Provides the most convenient and reliable means of verifying operation of Salisbury Voltage Detectors. Features instant push-button operation and requires a standard 9-volt battery (included). It’s portable and lightweight. To operate, push the button and move the tester toward the voltage detector being verified. The tester generates an electric field that activates the detector verifying the audible and visual signals are operational.
4667
500kV Selft Testing Voltage Detector Complete Kit: This Kit includes, 4644 Tester 240V to 500kV, 21517 Case, and 2500 Shotgun Adapter
4556
230kV Selft Testing Voltage Detector Complete Kit: This Kit includes, 4544 Tester 240V to 230kV, 21517 Case, and 2500 Shotgun Adapter
4644
500KV Self Testing Voltage Detector: Verify live or de-energized conductors. May be used with rubber insulating gloves or hot sticks using the splined universal end fitting. Indicate the presence of voltage with an extra bright LED light and a distinctive audible signal. 3 C batteries (included) 11 x 3.5
4544
230KV Self Testing Voltage Detector: Verify live or de-energized conductors. May be used with rubber insulating gloves or hot sticks using the splined universal end fitting. Indicate the presence of voltage with an extra bright LED light and a distinctive audible signal. 3 C batteries (included) 11 x 3.5
4744
NCV 69KV Self Testing Voltage Detector with URD Ranges: Verify live or de-energized conductors. May be used with rubber insulating gloves or hot sticks using the splined universal end fitting. Indicate the presence of voltage with an extra bright LED light and a distinctive audible signal. 3 C batteries (included) 11 x 3.5
CW
Teleheight Tool: Helps to figure quickly and accurately the heights of poles, trees, buildings, or conductor clearance. 2.25″ x 4.25″ leather case with belt loop inlcuded
T4070327
Truck Boom Leakage-Current Monitor: It mounts on truck body and hardwires into truck’s 12-Volt system, eliminating need for battery changes. The alarm sounds immediately upon overcurrent and continues until condition is corrected, eliminating the need to watch the actual current level that is continuously displayed on the digital LCD screen. A jack on the instrument panel accepts a standard ‘A” two-conductor phone plug to also trigger a truck horn or other external alarm. It automatically performs a rapid electronic self test before each use,and a test terminal on the panel permits a simple continuity check of monitor leads prior to each operation
C4070025
Sentinel Leakage-Current Monitor: An audible warning eliminates the need to watch the actual current level that is continuously displayed on the digital LCD screen. The Kit includes one coaxial cable and battery, two jumpers, and three hose clamps for connections to two or three rail ladders. Brackets on box secure to earth-grounded structure up to 58″ thick such as a transmission tower. A jack on the instrument panel accepts a standard ‘A” two-conductor phone plug to also trigger a truck horn or other external alarm
C4020288
Ladder Leakage Current Monitor Kit: Kit consists of one 200 micro-amp scale microammeter, three clamps for use on up to three-rail ladder, cable with clips and adapter to establish contact, bracket to ground and hold the meter on structure, two dry cell batteries, Instruction drawings for field assembly, and Operating instructions
Ready To Order?
© 2024 Brenco Power Line Tools