Hydraulic Tools
TA54603
TA54603 Tamper is ideal for soil compaction around utility poles, signs and fence posts. With few moving parts coupled with the closed hydraulic system results in an efficient tool that requires minimal maintenance and a long tool life.
TA54103
TA54103 Tamper is ideal for soil compaction around utility poles, signs and fence posts. With few moving parts coupled with the closed hydraulic system results in an efficient tool that requires minimal maintenance and a long tool life.
4001D
The 4001D Pole Puller utilizes a swivel and back plate combined with a chain for maximum grip as the hydraulic cylinder removes the pole. The pole puller can be disassembled for easy transport and storage. The 4001D includes the hydraulic cylinder, base plate (not pad), back plate, swivel chain hook assembly, and 6′ of chain
H4905A
H4905A: Uses serrated jaws or wrap around, high-strength alloy chain. It’s able to pull most any post size and shape, faster and easier than conventional manual methods, and includes pulling chain
PP10
The PP10 is designed to remove flanged type sign posts and irregularly shaped posts up to 8 in. / 20 cm wide. It features an 8 inch / 203 cm stroke and pulling force of 9800 lbs / 4450 kg. The PP10 uses two methods to solve post pulling problems. For flanged posts, gripper jaws grasp the flange and for irregular posts, a chain is used. Pins on the end of the chain may be inserted into holes in perforated posts to keep the chain from sliding. The PP10 is furnished with gripper jaws, chain with pins,
GD50133RF
GD50133RF: The lifting eye allows the operator to suspend the driver above the rod with ease. The long side handles give the operator control during the driving process. The in-line valve in the 8-foot hose whips gives the operator On/Off control where they are standing. The anvils are interchangeable, so that you can change the capacity of a ground rod driver by simply changing anvils. The removal of two bolts is all that is required to service the front end of the GD50.
GD50132RF
GD50132RF: The lifting eye allows the operator to suspend the driver above the rod with ease. The long side handles give the operator control during the driving process. The in-line valve in the 8-foot hose whips gives the operator On/Off control where they are standing. The anvils are interchangeable, so that you can change the capacity of a ground rod driver by simply changing anvils. The removal of two bolts is all that is required to service the front end of the GD50.
PD45132G
PD45132G In-Handle Trigger Post Driver: The standard PD45 will drive posts of almost any configuration, including “U” channel, round or square. The PD45 features dual guiding handles, a lifting eye and multiple post adapters. The optional adapters allow the PD45 to be used on smaller posts of different shapes. The trigger extends the full length of the handle allowing the operator to activate the post driver at any position of its length. The trigger is “spring loaded” to the OFF position. The PD45132G is specifically designed to meet State Department of Transportation (DOT) requirements for driving breakaway posts and delineators. It will drive posts to within 4 inches (100 mm) above ground level.
PD45132
PD45132 In-Handle Trigger Post Driver: The standard PD45 will drive posts of almost any configuration, including “U” channel, round or square. The PD45 features dual guiding handles, a lifting eye and multiple post adapters. The optional adapters allow the PD45 to be used on smaller posts of different shapes. The trigger extends the full length of the handle allowing the operator to activate the post driver at any position of its length. The trigger is “spring loaded” to the OFF position.
PD45131
PD45131 Remote Post Driver: The standard PD45 will drive posts of almost any configuration, including “U” channel, round or square. The PD45 features dual guiding handles, a lifting eye and multiple post adapters. The optional adapters allow the PD45 to be used on smaller posts of different shapes. This model is controlled by a remote on/off valve
that allows the operator to position the post driver and control its operation from a valve that is remote from the driver.
HPD-HV-U
HPD-HV-U with Universal Adapter: Can drive a variety of post sizes from small delineater posts up to 3-1/2 IN round posts including square, U channel, breakaway stubs, round, T fence, and wood. The Quick-Change front head design accommodates adapters for different types of posts. Dual guide handles for good directional control. A deep post opening and smooth operation ensures that the driver will not jump off of posts
Ready To Order?
© 2024 Brenco Power Line Tools