Aerial Tools & Equipment

Cable Pulling Sled

The pulling sled is used for aligning two or three cables in the multiple cable block and pulling overhead cables into position prior to lashing.

Universal Cable Block Pusher

This rugged tool makes the lashing process smoother by maintaining the proper cable lead between the lasher and the cable block.

(more…)

Cable Block Pusher 36″

Lock onto strands and push cable blocks out of the way of lasher during cable lashing. Aluminum channel with locking pins at each end.

Cable Block Pusher 24″

Lock onto strands and push cable blocks out of the way of lasher during cable lashing. Aluminum channel with locking pins at each end.

Cable Block Frame F

Used to support either the E Cable Block or Self Support Cable Block when pulling in pre-lashed or self support aerial cables.

FRAME F, all outside corners 4′-50′ pulls, requires 2 blocks.

Cable Block Frame E

Used to support either the E Cable Block or Self Support Cable Block when pulling in pre-lashed or self support aerial cables.

FRAME E, heavy inside corners 8′-50′ pulls, requires 2 blocks.

Cable Block Frame D

Used to support either the E Cable Block or Self Support Cable Block when pulling in pre-lashed or self support aerial cables.

FRAME D, light inside corners 4′-8′ pulls, requires 1 block.

Cable Block Frame C

Used to support either the E Cable Block or Self Support Cable Block when pulling in pre-lashed or self support aerial cables.

FRAME C, use at in-line poles, requires 1 block.

Cable Block Frame B

Used to support either the E Cable Block or Self Support Cable Block when pulling in pre-lashed or self support aerial cables.

FRAME B, use at end poles, requires 1 block.

E Cable Block

Neoprene-coated aluminum sheave has 5.24″ working diameter, clearance for 2.25″ cable, and plated steel bracket and wing bolt for mounting onto block frames.

Econo Block with Dual Rollers

Supports fiber optic cables during cable pullout.

Designed to prevent cables from catching or snagging.

(more…)

Econo Block with Rubber Roller

Supports fiber optic cables during cable pullout.

Designed to prevent cables from catching or snagging.

(more…)

Econo Block

Supports fiber optic cables during cable pullout.

Designed to prevent cables from catching or snagging.

(more…)

Pole Mount

This 2.75″ single roller block is designed to support fiber optic, self-support, or small copper cables at poles.

(more…)

Mounting Bracket w/ 90° Corner Block

Accommodates fiber optic cables up to .688″ in diameter.

Working Load Limit: 750 lbs.

(more…)

Mounting Bracket w/ 45° Corner Block

Accommodates fiber optic cables up to .688″ in diameter.

Working Load Limit: 750 lbs.

(more…)

90° Corner Block w/ Heavy Duty Aluminum Rollers

Accommodates fiber optic cables up to .688″ in diameter.

Working Load Limit: 750 lbs.

(more…)

45° Corner Block w/ Heavy Duty Aluminum Rollers

Accommodates fiber optic cables up to .688″ in diameter.

Working Load Limit: 750 lbs.

(more…)

Mounting Bracket For Fiber Corner Blocks

Connects to the pole via a 5/8” thru bolt in the top hole and a lag bolt in the bottom hole.

Working Load Limit: 750 lbs.

(more…)

Hinged Cable Block

A 7/8″ hex actuates a screw vise to grip the strand and keeps the block stationary during the pulling process.

Available for strand sizes 3/8″-9/16″.

(more…)